Oak Ridge Today

Council wants to roughly triple proposed water rate at ORNL, Y-12

Posted at
By 3 Comments

Oak-Ridge-Water-Treatment-Plant-2009-1

The Oak Ridge Water Treatment Plant is pictured on Pine Ridge above the Y-12 National Security Complex. (Photo by City of Oak Ridge)

 

Note: This story was updated at 6:50 p.m.

Some Oak Ridge City Council members have questioned whether the federal government is paying enough for municipal water at Oak Ridge National Laboratory and Y-12 National Security Complex, and on Monday, four of them proposed roughly tripling a potential new high-volume water rate at the two federal sites in 2017.

The new water rate would apply to water consumption over 20 million gallons per month, which would limit it to ORNL and Y-12. The two sites use a total of more than 100 million gallons of water per month.

The new rate is expected to go into effect in April 2017 only if Oak Ridge and the U.S. Department of Energy aren’t able to agree on a contract for water at ORNL and Y-12 by the end of March. Those two federal sites now pay a flat annual rate but could default to what is known as a retail rate if the contract lapses.

The city staff had proposed a new default rate of $1.08 per thousand gallons for consumption over 20 million gallons starting January 1, 2017. The following year, in 2018, the staff had proposed a $1.35 rate.

But four City Council members—Rick Chinn, Charlie Hensley, Trina Baughn, and Chuck Hope—voted to raise the $1.08 rate in 2017 to $3 per 1,000 gallons. Oak Ridge Mayor Warren Gooch, Mayor Pro Tem Ellen Smith, and Council member Kelly Callison voted against the increase. [Read more…]

Council to consider water rate, sewer rate, trash fee increases

Posted at
By 1 Comment

Oak Ridge City Council 2014

The Oak Ridge City Council is pictured above in 2014. (Photo courtesy City of Oak Ridge)

 

Note: This story was updated at 10:38 a.m.

The Oak Ridge City Council will consider increases in the water and sewer rates that would go into effect in January 2017 and January 2018 during a regular meeting tonight (Monday, September 12). Council will also consider a trash fee increase that members endorsed during budget deliberations in June.

A 6 percent increase has been proposed for both water and sewer rates starting January 1, 2017. The next year, effective January 1, 2018, a 4 percent increase has been proposed for water rates and a 6 percent increase has been proposed for sewer rates.

A home that uses the minimum amount would pay an extra $2.26 per month for water and sewer starting in 2017 and an additional $2.17 per month in 2018.

A home that uses 5,000 gallons per month would pay $5.33 more per month for both water and sewer in 2017 and another $4.87 in 2018.
[Read more…]

Last seven days have been great for Oak Ridge, mayor says; read presentation here

Posted at
By 3 Comments

warren-gooch-2016

Warren Gooch (2016 file photo by John Huotari/Oak Ridge Today)

 

Note: This is a lightly edited version of a presentation that Oak Ridge Mayor Warren Gooch gave to the East Tennessee Economic Council on Friday, September 9.

It is a pleasure for me to be here this morning as I begin my 22nd month as mayor and to share my thoughts about the positive direction of our city, and why that is important to you and your companies. First, I want to thank you for supporting Oak Ridge and investing your time and your money here.

My family and I have lived in Oak Ridge for 23 years. But my law firm, Kramer Rayson, has been involved in one way or another with Oak Ridge from its earliest days when our founding partner, Russell Kramer, received a call from an old friend in Washington. (Gooch tells a story about a telephone call with President Roosevelt.)

By any standard, the last seven days have been great for Oak Ridge and have increased the excitement that is being expressed about the momentum of our city.

First, demolition has accelerated at the old mall as construction for Main Street Oak Ridge ushers in a new and exciting era for our community. The tax increment financing (TIF) loan for Main Street had closed, and so has the loan for the new Marriott hotel that is being built. The importance of Main Street Oak Ridge to the image and self-confidence of our city and the economic vitality of Oak Ridge, Anderson, and Roane counties cannot be overstated. The success of Main Street and the continued redevelopment of our center city’s retail, residential, and commercial properties is my number one priority. We must work hard to maintain this momentum and take full advantage of it in the coming months. If we are successful, it will help you recruit the new workers you require for your businesses.

Second, LeMond Composites announced its licensing agreement with Oak Ridge National Laboratory and that the company is coming to Oak Ridge to manufacture innovative, high-volume, low-cost, carbon fiber in the Horizon Center Industrial Park.

Third, the National Park Service named Kris Kirby as the superintendent of the Manhattan Project National Historical Park. [Read more…]

ORNL collaborates with six small businesses on clean energy tech

Posted at
By Leave a Comment

By Oak Ridge National Laboratory

Six small companies will tap the expertise of the U.S. Department of Energy’s Oak Ridge National Laboratory to move their manufacturing, fuel cell, geothermal, and vehicle technologies closer to the marketplace.

The businesses are among 43 selected to participate in the second round of DOE’s Small Business Vouchers, or SBV, pilot. With vouchers in hand, these businesses can better leverage the world-class capabilities of the department’s national laboratory system and bring their next-generation clean energy technologies to the marketplace faster.

“We need to accelerate the pace of clean energy innovation to build stronger economy and a brighter, cleaner future for our nation,” said David Friedman, acting assistant secretary for DOE’s Office of Energy Efficiency and Renewable Energy, or EERE. “The Small Business Vouchers pilot breaks down barriers for some of our greatest entrepreneurial minds, allowing them to work with our national laboratories across sectors and industries to accelerate a clean energy revolution that’s been under way since 2008.”

The Department opened the first round of SBV, a technology-to-market lab impact pilot project, in September 2015. In SBV’s first round, 33 small businesses received vouchers totaling $6.7 million. The 43 awards announced in August total more than $8 million. [Read more…]

ORNL receives DOE funding for applications for more powerful supercomputers

Posted at
By 1 Comment

Oak Ridge National Laboratory Sign

Photo by ORNL

 

Oak Ridge National Laboratory has received funding from a federal project to develop applications for more powerful supercomputers, systems that could be 50 to 100 times more powerful than today’s fastest supercomputers.

The project is the U.S. Department of Energy’s Exascale Computing Project, or ECP. It’s to develop applications for future exascale systems. Exascale refers to high-performance computing systems capable of at least a billion billion calculations per second, which is up to 100 times faster than the nation’s most powerful supercomputers in use today, a press release said.

The work on applications will help guide DOE’s development of a U.S. exascale ecosystem as part of President Barack Obama’s National Strategic Computing Initiative, or NSCI, the press release said.

The first round of ECP funding totals $39.8 million for 22 proposals representing teams from 45 research and academic organizations. ORNL researchers and technical staff will participate in 12 of the 22 projects.

The awards, announced Wedneday, target advanced modeling and simulation solutions to specific challenges supporting key DOE missions in science, clean energy, and national security, as well as collaborations such as the Precision Medicine Initiative with the National Institutes of Health’s National Cancer Institute, the press release said. [Read more…]

Opinion: Alexander discusses ETTP demolition, development; Oak Ridge cleanup work

Posted at
By Leave a Comment

Lamar Alexander

Lamar Alexander

By Lamar Alexander

This week marked the end of an era. The last of the five uranium enrichment buildings in Oak Ridge has been cleaned up, making land available for new companies and new jobs coming to East Tennessee.

Tennessee should be extremely proud of the men and women who have worked for more than a decade to complete the demolition and cleanup at the East Tennessee Technology Park.

The story of how these buildings first came to be built is by now a familiar one. In 1942, President Franklin D. Roosevelt asked Senator Kenneth McKellar, the Tennessean who chaired the Appropriations Committee, to hide $2 billion for a secret project to win World War II. McKellar replied, “Mr. President, I have just one question: Where in Tennessee do you want me to hide it?”

They hid it in Oak Ridge, on 2,200 acres along the Clinch River, where they quietly built K-25, the largest building in the world, to enrich uranium through gaseous diffusion—a complicated and now mostly obsolete process. [Read more…]

Oak Ridge supports ORNL, LeMond Composites carbon fiber partnership

Posted at
By Leave a Comment

Jones LeMond Watson and Creswell Aug 31 2016

Pictured above at a meeting on Wednesday, Aug. 31, 2016, on a new carbon fiber partnership between Oak Ridge-based company LeMond Composites and Oak Ridge National Laboratory are, from left, Steve Jones (Oak Ridge economic development consultant), Greg LeMond (LeMond Composites), Mark Watson (Oak Ridge city manager), and Wade Creswell (president of The Roane Alliance). (Photo by City of Oak Ridge)

 

By City of Oak Ridge

The City of Oak Ridge is proud to support the recent announcement that LeMond Composites, a new company in Oak Ridge offering solutions for high-volume and low-cost carbon fiber, has secured a licensing agreement with Oak Ridge National Laboratory.

The news was made public on August 29 in a release from LeMond Composites. The company, founded earlier this year by three-time Tour de France champion Greg LeMond, focuses on making carbon fiber composites with global applications. The agreement with ORNL will make LeMond Composites the first company to offer these newly developed products to the transportation, renewable energy, and infrastructure markets.

LeMond Composites plans to build their first carbon fiber production line at their recently purchased facility on Palladium Way at Horizon Center in west Oak Ridge. Their first commercially available product is expected to be ready in early 2018.

“I am ecstatic about this unique technological application for carbon fiber in our community,” Oak Ridge Mayor Warren Gooch said. “We look forward to working with LeMond Composites to create jobs and further investment in Oak Ridge.” [Read more…]

Photos: ORNL, Boeing set Guinness World Record with largest solid 3D printed item

Posted at
By Leave a Comment

ORNL-Boeing-Empric-and-Peter-Aug-29-2016-3-Web

Guinness World Records Judge Michael Empric, left, is pictured above with Bill Peter, director of ORNL’s Manufacturing Demonstration Facility in Hardin Valley, after Empric had confirmed that a trim-and-drill tool made at the MDF for Boeing (it’s partially pictured in the foreground) had set the world record for largest solid printed 3D item on Monday, Aug. 29, 2016. (Photo by John Huotari/Oak Ridge Today)

 

A tool made by Oak Ridge National Laboratory has set a world record for largest solid item manufactured on a 3D printer. Guinness World Records confirmed the tool’s measurements during a visit to ORNL’s Manufacturing Demonstration Facility in Hardin Valley on Monday.

Here are pictures from the Monday morning award ceremony by John Huotari of Oak Ridge Today and ORNL/U.S. Department of Energy.

The trim-and-drill tool measures 17.5 feet long, 5.5 feet wide, and 1.5 feet tall. It’s comparable in length to a large sport utility vehicle and weighs approximately 1,650 pounds.

It will be used to help make a wing part on the Boeing 777X airplane, a passenger jet. After ORNL completes some testing, Boeing will evaluate the tool in the company’s new production facility in St. Louis and then provide information to ORNL about its performance. [Read more…]

Khaleel to lead ORNL’s Energy and Environmental Sciences Directorate

Posted at
By Leave a Comment

Mohammad A. Khaleel

Mohammad A. Khaleel

 

Mohammad A. “Moe” Khaleel has been named associate laboratory director for energy and environmental sciences at the U.S. Department of Energy’s Oak Ridge National Laboratory.

The work that Khaleel will oversee for the Energy and Environmental Sciences Directorate, or EESD, includes biological and environmental research for DOE’s Office of Science and an extensive set of research and development programs supported by DOE’s Office of Energy Efficiency and Renewable Energy, Office of Electricity Delivery, and Energy Reliability and Office of Fossil Energy.

EESD also engages with a broad external community that includes a growing list of industrial partners through the ORNL-managed BioEnergy Science Center, the Manufacturing Demonstration Facility, and the National Transportation Research Center, a press release said.

“Moe brings a rich background as both a researcher and scientific leader,” ORNL Director Thom Mason said. “In his new position, he will oversee activities that translate basic science into applied research and development (R&D), with direct benefits for energy production, transmission, and conservation. ORNL will benefit from his experience and his vision.” [Read more…]

ORNL, Boeing set Guinness World Record with 3D printed tool for Boeing 777X wing part

Posted at
By Leave a Comment

GUINNESS WORLD RECORDS measurement of ORNL-Boeing trim tool Aug 29 2016

Official measurement of the 3D printed trim tool co-developed by Oak Ridge National Laboratory and The Boeing Company exceeded the required minimum size to achieve the Guinness World Records title of largest solid 3D printed item. Pictured above on Monday, Aug. 29, 2016, is Guinness World Records Judge Michael Empric. (Photo courtesy ORNL, U.S. Department of Energy)

 

HARDIN VALLEY—A tool made by Oak Ridge National Laboratory has set a world record for largest solid item manufactured on a 3D printer. Guinness World Records confirmed the tool’s measurements during a visit to ORNL’s Manufacturing Demonstration Facility in Hardin Valley on Monday.

The trim-and-drill tool measures 17.5 feet long, 5.5 feet wide, and 1.5 feet tall. It’s comparable in length to a large sport utility vehicle and weighs approximately 1,650 pounds.

It will be used to help make a wing part on the Boeing 777X airplane, a passenger jet. After ORNL completes some testing, Boeing will evaluate the tool in the company’s new production facility in St. Louis and then provide information to ORNL about its performance.

ORNL printed the trim-and-drill tool in only 30 hours on a 3D printer at the Manufacturing Demonstration Facility in Hardin Valley using mostly ABS (acrylonitrile butadiene styrene) mixed with about 20 percent carbon fiber. ABS is the same material used to produce Legos, and it’s a tough, strong polymer, said Bill Peter, MDF director.

Judge Michael Empric said Guinness World Records had set a minimum measurement of 10.5 cubic feet for the new largest solid 3D printed item, which is a new category. The Boeing tool printed by ORNL measured much larger, 82.4 cubic feet, Empric said.

The original tool was printed in one piece and was larger, but it was trimmed down, Empric said. [Read more…]

LeMond, Tour de France champion, plans production in Oak Ridge, thinks area could be world hub for carbon fiber

Posted at
By 2 Comments

Greg LeMond at the Carbon Fiber Technology Facility

Three-time Tour de France champion Greg LeMond, right, chairman and co-CEO of LeMond Companies, which owns LeMond Composites, tours ORNL’s Carbon Fiber Technology Facility. (Image courtesy of Oak Ridge National Laboratory, U.S. Department of Energy)

 

A new carbon fiber company that includes three-time Tour de France champion Greg LeMond plans to build a carbon fiber production line in west Oak Ridge to make composites for use in transportation, renewable energy, and infrastructure, and LeMond thinks the Knoxville area will become the world hub for carbon fiber.

The new company, LeMond Composites, has signed a licensing agreement with Oak Ridge National Laboratory, and it has purchased the former Theragenics building at Horizon Center, where CVMR, an international company that uses ore concentrates to create pure metal powders, had once planned to locate its headquarters and research and development.

LeMond Composites closed on the property, which includes about 21 acres, on July 21 for $5.4 million. It’s right next to ORNL’s Carbon Fiber Technology Facility, or CFTF, at Horizon Center. Renovations at the former Theragenics building are already under way.

Carbon fiber is light, stiff, and strong, a press release said. That makes it the perfect material for advanced composites in a variety of applications, including transportation, renewable energy, and infrastructure, the release said. It can be used to improve efficiency, save energy, and build or repair vehicles and planes, wind turbines and containers, and bridges and tunnels.

But the biggest obstacle to its widespread use has been its high cost. [Read more…]

Historic day: Last wall to be demolished at last of big five uranium-enriching buildings at ETTP (K-25)

Posted at
By Leave a Comment

K-27 Demolition Aug 17 2016 Freeny

The last wall of the last of the big five buildings once used to enrich uranium at the former K-25 site will be demolished Tuesday. A section of the K-27 Building, the last to be demolished, is pictured above on Wednesday, Aug. 17, 2016. (DOE photo by Lynn Freeny)

 

The last wall of the last of the big five buildings once used to enrich uranium at the former K-25 site will be demolished Tuesday.

Demolition on the last building, the K-27 Building, started in February.

The other four buildings—K-25, K-29, K-31, and K-33—were demolished between 2006 and 2015. All five of the huge buildings once used a process called gaseous diffusion to produce highly enriched uranium for atomic weapons and commercial nuclear power plants, starting during World War II and continuing through the Cold War. The largest was K-25, a mile-long U-shaped building.

When K-27 demolition is complete, it will be the first time that all of a site’s uranium-enriching gaseous diffusion buildings will have been cleaned up anywhere in the world, officials said.

“Demolition eliminates environmental hazards and prepares the land for productive reuse through deindustrialization,” a media advisory said. [Read more…]