Oak Ridge Today

Two protesters questioned, released at Y-12’s east gate

Posted at
By Leave a Comment

Two women protesting the U.S. Department of Energy and trying to inform the public of the effects of global warming were questioned and released at the Y-12 National Security Complex in Oak Ridge on Monday morning, authorities said.

New Energy Secretary Rick Perry was at Y-12 for a tour on Monday morning, but it’s not clear if the two women were there because of Perry.

The Oak Ridge Police Department responded to a call of two protesters trespassing at Y-12’s east gate at 301 Bear Creek Road at about 10:13 a.m. Monday. Perry was reported to have left the nuclear weapons plant by then. [Read more…]

Funding for ORNL could be cut $185 million under president’s budget

Posted at
By Leave a Comment

Oak Ridge National Laboratory Sign

Photo by ORNL

 

Funding for Oak Ridge National Laboratory could be cut by $185 million under the budget request released by President Donald Trump on Tuesday.

If Trump’s budget request is enacted, the lab’s funding would drop from about $1.247 billion in Fiscal Year 2017, which ends September 30, to roughly $1.062 billion in Fiscal Year 2018. That would be a decrease of roughly 15 percent.

The reduction would be even greater when compared to the $1.27 billion allocated to ORNL in Fiscal Year 2016, according to preliminary laboratory tables posted by the U.S. Department of Energy. In that case, it would be about a $206 million decrease over two years.

But it’s not clear that the president’s budget request will pass or even be considered in Congress. Both Republican and Democratic lawmakers, including Senator John Cornyn, the second-ranking Republican in the GOP-controlled Senate, have declared the Fiscal Year 2018 presidential budget request that was released Tuesday “dead on arrival,” according to NBC News. Lawmakers have said that the cuts are too steep and the accounting is too unrealistic, the network reported.

Under the president’s budget request, overall spending for DOE would drop by $1.6 billion from $29.6 billion in Fiscal Year 2016 to $28 billion in Fiscal Year 2018.

Funding for DOE’s Office of Science would decrease to $4.5 billion, or $874 million below the Fiscal Year 2016 level. ORNL is an Office of Science lab. [Read more…]

He once called for eliminating DOE. Now Secretary Perry pledges to be an advocate.

Posted at
By Leave a Comment

Energy Secretary Rick Perry drives a 3D printed personal utility vehicle at Oak Ridge National Laboratory's Manufacturing Demonstration Facility on Hardin Valley Road on Monday, May 22, 2017. His passenger is Craig Blue, director of energy efficiency and renewable energy programs at ORNL. (Photo by John Huotari/Oak Ridge Today)

Energy Secretary Rick Perry drives a 3D-printed utility vehicle, or PUV, at Oak Ridge National Laboratory’s Manufacturing Demonstration Facility in Hardin Valley on Monday, May 22, 2017. His passenger is Craig Blue, director of energy efficiency and renewable energy programs at ORNL. (Photo by John Huotari/Oak Ridge Today)

 

Note: This story was last updated at 8:30 a.m. May 24.

HARDIN VALLEY—He once called for eliminating the U.S. Department of Energy, but after touring federal sites in Oak Ridge and Hardin Valley on Monday, new Energy Secretary Rick Perry pledged to be an advocate for at least some programs.

Perry, a former Texas governor who was confirmed as energy secretary on March 2, was asked about his comments calling for the elimination of three federal departments, including DOE, during the 2012 presidential campaign. His call to eliminate the three departments probably received more attention than it might have otherwise because, in a moment that received a lot of attention, Perry couldn’t recall the name of the Department of Energy during a November 2011 debate. Some believe that moment helped sink his presidential campaign.

Earlier this year, Perry told U.S. senators during his confirmation hearing that he regretted his earlier call to eliminate DOE. After being briefed on many vital functions of DOE, he no longer believed that it should be eliminated, Perry told the Senate Energy and Natural Resources Committee, according to The New York Times.

During a stop in Hardin Valley on Monday afternoon, Perry acknowledged he’s learned a lot since the 2012 campaign, including in his visit to Oak Ridge and at DOE headquarters in Washington, D.C., and in trips to Idaho National Laboratory and the Waste Isolation Pilot Plant in southeast New Mexico.

He suggested he might not be the only one unaware of some of the innovations that have roots in or are developed in places like Oak Ridge, innovations like gene therapy, supercomputing, and 3D printing. The American public may also not be aware of how that “cutting-edge” technology can be used to create jobs and wealth, Perry said.

“Those are things I readily admit I didn’t know five years ago,” Perry said after operating a 3D-printed excavator and test-driving a printed utility vehicle—and learning about other innovations such as supercomputers at Oak Ridge National Laboratory and composite work at its Manufacturing Demonstration Facility in Hardin Valley on Monday afternoon. “There are a lot of things that have surprised me.” [Read more…]

ORNL: UT-Battelle Scholarship awarded to Bearden student

Posted at
By Leave a Comment

UT-Battelle Scholarship winner Allison Michelle Campbell of Bearden High School with Oak Ridge National Laboratory Director Thom Mason. (Photo by ORNL)

UT-Battelle Scholarship winner Allison Michelle Campbell of Bearden High School with Oak Ridge National Laboratory Director Thom Mason. (Photo by ORNL)

 

Bearden High School senior Allison Michelle Campbell has been named recipient of the 2017 UT-Battelle Scholarship to attend the University of Tennessee.

The scholarship is awarded to a graduating senior planning to study science, mathematics, or engineering at UT. The competitive scholarship is presented annually to a graduating student with a parent employed at the U.S. Department of Energy’s Oak Ridge National Laboratory by UT-Battelle, ORNL’s managing contractor, a press release said.

The scholarship is renewable for up to four years and is worth a total of $20,000. Campbell is the daughter of ORNL staff member Amy C. Campbell, who works in the Business Services Directorate, and Michael A. Campbell.

Among numerous activities at Bearden, Campbell is president of Bearden’s National Honors Society chapter and a member of the Mu Alpha Theta mathematics honors society. In the summer of 2015, she was selected for the Governor’s School for Science and Engineering and the National Science Foundation’s Young Scholars Program. [Read more…]

ORNL researcher receives Innovator of Year award for energy efficiency work

Posted at
By Leave a Comment

ORNL Roderick Jackson on Sept. 23, 2015

Roderick Jackson is principal investigator on the Additive Manufacturing Integrated Energy (AMIE) Demonstration Project, a model for energy-efficient systems that link buildings, vehicles, and the electrical grid. (File photo by John Huotari/Oak Ridge Today)

Researcher Roderick Jackson of Oak Ridge National Laboratory was awarded an Innovator of the Year award in 2017 at the Young, Gifted, and Empowered Awards, according to the U.S. Department of Energy. Jackson was recognized for his groundbreaking work in building energy efficiency innovation, DOE said in a story published Tuesday by the DOE Office of Energy Efficiency and Renewable Energy.

Jackson is the lead at ORNL’s Building Envelope Systems Research Group, and he leads the partnership between the Building Technologies Office, or BTO, and ORNL on building envelope projects, DOE said. Jackson works with both BTO’s Emerging Technologies and Residential Buildings Integration programs.

Jackson also serves as the technical lead for the Additive Manufacturing Integrated Energy (AMIE) demonstration project. As part of that project, ORNL and others unveiled a vehicle and house in September 2015 that had been built using large-scale 3D printers at the lab’s Manufacturing Demonstration Facility in Hardin Valley. The 210-square-foot solar-powered house and printed utility vehicle, or PUV, can provide power to each other. The house is one of the world’s first 3D printed homes.

The home and vehicle are part of a project designed to answer “what if” questions that could lead to innovations in building and car construction and energy use, storage, and consumption.

DOE said the Young, Gifted, and Empowered awards are in their third year, and they recognize exceptional young African-American professionals from Mississippi who are champions in the arts, business, philanthropy, education, innovation, and leadership. The honorees are between the ages of 25-45 and have demonstrated a noteworthy commitment to excellence and community service and a high level of character, leadership, and innovation, DOE said. [Read more…]

Curious about 3D printed vehicles, including excavator? ORNL has posted photos

Posted at
By 2 Comments

Oak Ridge National Laboratory has helped produce the first fully functional excavator that uses parts made through additive manufacturing, or 3D printing. The excavator is pictured above on Feb. 27, 2017. (Photo courtesy of Oak Ridge National Laboratory, U.S. Dept. of Energy)

Oak Ridge National Laboratory has helped produce the first fully functional excavator that uses parts made through additive manufacturing, or 3D printing. The excavator is pictured above on Feb. 27, 2017. (Photo courtesy of Oak Ridge National Laboratory, U.S. Dept. of Energy)

 

Oak Ridge National Laboratory has helped produce the first fully functional excavator that uses parts made through additive manufacturing, or 3D printing.

The excavator, part of a working demonstration known as Project AME, was made in collaboration with ORNL partners in industry, government, and academia. The project helps showcase a range of industrial applications for 3D printing, ORNL said.

Additive manufacturing is the process used to build something one layer at a time. Rather than ink, 3D printers use polymers.

One of the most well-known examples is the Shelby Cobra car 3-D printed on a large-scale polymer printer at ORNL’s Manufacturing Demonstration Facility in Hardin Valley. President Barack Obama and Vice President Joe Biden admired that vehicle—and joked about taking it for a spin—during a trip to East Tennessee in January 2015.

ORNL has been involved in other projects using 3D printing that have attracted attention, and the lab has posted photos of its 3D printed vehicles. You can see them here. [Read more…]

ORNL, HTS International Corporation to collaborate on manufacturing research

Posted at
By Leave a Comment

Oak Ridge National Laboratory and HTS International are exploring collaborations in advanced manufacturing research such as conformal cooling. These specially placed coolant lines allow parts to cool faster, which increases productivity for molding and casting manufacturers. (Image by ORNL)

Oak Ridge National Laboratory and HTS International are exploring collaborations in advanced manufacturing research such as conformal cooling. These specially placed coolant lines allow parts to cool faster, which increases productivity for molding and casting manufacturers. (Image by ORNL)

 

HTS International Corporation and Oak Ridge National Laboratory have signed an agreement to explore potential collaborations in advanced manufacturing research.

The memorandum of understanding follows HTS’s recent decision to locate its headquarters and production operations in a Knox County business park adjacent to the U.S. Department of Energy’s Manufacturing Demonstration Facility at ORNL (in Hardin Valley). The lab’s expertise and unique facilities in materials science, metallurgy, and advanced manufacturing attracted the attention of HTS’s leadership during a 2015 visit to Tennessee.

“Our researchers push the boundaries of what’s possible with materials and advanced manufacturing techniques, and we value partners such as HTS,” said Thomas Zacharia, deputy for science and technology at ORNL. “Industrial partners help to ensure we’re tackling the right problems, and our results help them to improve production capabilities and American competitiveness.”

HTS supplies specialty products to the injection molding and die casting industries, using its proprietary metal fusion technology to produce large-scale steel production components with conformal cooling. These specially placed coolant lines allow parts to cool faster, which increases productivity for molding and casting manufacturers. [Read more…]

Dick Smyser Community Lecture on Thursday to feature advanced composites manufacturing executive

Posted at
By Leave a Comment

Craig Blue

Craig Blue

The 19th Annual Dick Smyser Community Lecture Series on Thursday will feature Craig Blue, chief executive officer of the Institute for Advanced Composites Manufacturing Innovation.

Blue will give an overview of the Institute for Advanced Composites Manufacturing Innovation and Oak Ridge National Laboratory’s Manufacturing Demonstration Facility. The lecture is sponsored by Friends of ORNL, or FORNL. It’s free and will be at the American Museum of Science and Energy at 300 South Tulane Avenue in Oak Ridge.

A reception will be held in the museum lobby starting at 5:30 p.m. (snacks will be served), and the lecture starts at 6 p.m. in the museum auditorium, a press release said. This talk should be of interest to the general public, the release said. [Read more…]

ORNL launches new business accelerator for energy tech entrepreneurs

Posted at
By Leave a Comment

Pictured above during an Innovations Crossroads business accelerator announcement on Tuesday, Sept. 20, 2016, at the National Transportation Research Center in Hardin Valley are, from left, Mark Johnson, Johanna Wolfson, Moe Khaleel, Thomas McDonald, Charlie Brock. (Photo by ORNL)

Pictured above during an Innovation Crossroads business accelerator announcement on Tuesday, Sept. 20, 2016, at the National Transportation Research Center in Hardin Valley are, from left, Mark Johnson, Johanna Wolfson, Moe Khaleel, Thomas McDonald, and Charlie Brock. (Photo by ORNL)

 

The nation’s top innovators will soon have the opportunity to advance their promising energy technology ideas at the U.S. Department of Energy’s Oak Ridge National Laboratory in a new program called Innovation Crossroads. Up to five entrepreneurs will receive a fellowship that covers living costs, benefits, and a travel stipend for up to two years, plus up to $350,000 to use on collaborative research and development at ORNL. The first cohort is expected to start the program in early 2017, a press release said.

A growing global population and increased industrialization require new approaches to energy that are reliable, affordable, and carbon neutral. While important progress has been made in cost reduction and deployment of clean energy technologies, a new program at DOE’s Office of Energy Efficiency and Renewable Energy, or EERE, will invest in the next generation of first-time clean energy entrepreneurs to accelerate the pace of innovation, the press release said.

Innovation Crossroads is the most recent clean energy accelerator to launch at a DOE national laboratory and the first located in the Southeast. ORNL is the nation’s largest science and energy laboratory, with expertise and resources in clean energy, computing, neutron science, advanced materials, and nuclear science. [Read more…]

Photos: ORNL, Boeing set Guinness World Record with largest solid 3D printed item

Posted at
By Leave a Comment

ORNL-Boeing-Empric-and-Peter-Aug-29-2016-3-Web

Guinness World Records Judge Michael Empric, left, is pictured above with Bill Peter, director of ORNL’s Manufacturing Demonstration Facility in Hardin Valley, after Empric had confirmed that a trim-and-drill tool made at the MDF for Boeing (it’s partially pictured in the foreground) had set the world record for largest solid printed 3D item on Monday, Aug. 29, 2016. (Photo by John Huotari/Oak Ridge Today)

 

A tool made by Oak Ridge National Laboratory has set a world record for largest solid item manufactured on a 3D printer. Guinness World Records confirmed the tool’s measurements during a visit to ORNL’s Manufacturing Demonstration Facility in Hardin Valley on Monday.

Here are pictures from the Monday morning award ceremony by John Huotari of Oak Ridge Today and ORNL/U.S. Department of Energy.

The trim-and-drill tool measures 17.5 feet long, 5.5 feet wide, and 1.5 feet tall. It’s comparable in length to a large sport utility vehicle and weighs approximately 1,650 pounds.

It will be used to help make a wing part on the Boeing 777X airplane, a passenger jet. After ORNL completes some testing, Boeing will evaluate the tool in the company’s new production facility in St. Louis and then provide information to ORNL about its performance. [Read more…]

Khaleel to lead ORNL’s Energy and Environmental Sciences Directorate

Posted at
By Leave a Comment

Mohammad A. Khaleel

Mohammad A. Khaleel

 

Mohammad A. “Moe” Khaleel has been named associate laboratory director for energy and environmental sciences at the U.S. Department of Energy’s Oak Ridge National Laboratory.

The work that Khaleel will oversee for the Energy and Environmental Sciences Directorate, or EESD, includes biological and environmental research for DOE’s Office of Science and an extensive set of research and development programs supported by DOE’s Office of Energy Efficiency and Renewable Energy, Office of Electricity Delivery, and Energy Reliability and Office of Fossil Energy.

EESD also engages with a broad external community that includes a growing list of industrial partners through the ORNL-managed BioEnergy Science Center, the Manufacturing Demonstration Facility, and the National Transportation Research Center, a press release said.

“Moe brings a rich background as both a researcher and scientific leader,” ORNL Director Thom Mason said. “In his new position, he will oversee activities that translate basic science into applied research and development (R&D), with direct benefits for energy production, transmission, and conservation. ORNL will benefit from his experience and his vision.” [Read more…]

ORNL, Boeing set Guinness World Record with 3D printed tool for Boeing 777X wing part

Posted at
By Leave a Comment

GUINNESS WORLD RECORDS measurement of ORNL-Boeing trim tool Aug 29 2016

Official measurement of the 3D printed trim tool co-developed by Oak Ridge National Laboratory and The Boeing Company exceeded the required minimum size to achieve the Guinness World Records title of largest solid 3D printed item. Pictured above on Monday, Aug. 29, 2016, is Guinness World Records Judge Michael Empric. (Photo courtesy ORNL, U.S. Department of Energy)

 

HARDIN VALLEY—A tool made by Oak Ridge National Laboratory has set a world record for largest solid item manufactured on a 3D printer. Guinness World Records confirmed the tool’s measurements during a visit to ORNL’s Manufacturing Demonstration Facility in Hardin Valley on Monday.

The trim-and-drill tool measures 17.5 feet long, 5.5 feet wide, and 1.5 feet tall. It’s comparable in length to a large sport utility vehicle and weighs approximately 1,650 pounds.

It will be used to help make a wing part on the Boeing 777X airplane, a passenger jet. After ORNL completes some testing, Boeing will evaluate the tool in the company’s new production facility in St. Louis and then provide information to ORNL about its performance.

ORNL printed the trim-and-drill tool in only 30 hours on a 3D printer at the Manufacturing Demonstration Facility in Hardin Valley using mostly ABS (acrylonitrile butadiene styrene) mixed with about 20 percent carbon fiber. ABS is the same material used to produce Legos, and it’s a tough, strong polymer, said Bill Peter, MDF director.

Judge Michael Empric said Guinness World Records had set a minimum measurement of 10.5 cubic feet for the new largest solid 3D printed item, which is a new category. The Boeing tool printed by ORNL measured much larger, 82.4 cubic feet, Empric said.

The original tool was printed in one piece and was larger, but it was trimmed down, Empric said. [Read more…]