Oak Ridge Today

Gooch: Main Street No. 1 priority, gives updates on National Park, reappraisals, airport

Posted at
By Leave a Comment

Main Street Oak Ridge Site Plan April 16, 2015

Oak Ridge Mayor Warren Gooch on Tuesday said his number one priority for the community is the successful development of Main Street Oak Ridge, which would redevelop the former Oak Ridge Mall. Pictured above is a cropped picture of the Main Street Oak Ridge site plan as of April 16. A link to a larger PDF version of the plan is included in the story below.

 

Note: Oak Ridge Mayor Warren Gooch gave an update on positive developments and challenges during a talk to the League of Women Voters of Oak Ridge on Tuesday, May 5. Here is a lightly edited version of his remarks, which organized the positive developments and challenges into sections. Gooch was appointed mayor by the seven-member Oak Ridge City Council on November 24. This is his first four-year term on the City Council.

It is a distinct privilege for me to serve as your mayor, but I always preface my remarks by saying that I am not speaking today for Council or for the city manager. I have one vote on Council, but I do consider myself to be the chairman of the board of directors for the city.

In that capacity, as I enter my sixth month of service as mayor, I want to share my thoughts about positive developments in our city, discuss near-term challenges that we face, share the results that I have from the community survey that I have been conducting, and leave time for your questions and comments.

First. My number one priority for our community is the successful development of Main Street Oak Ridge (which would redevelop the former Oak Ridge Mall), and it is moving forward. Last week, Crosland Southeast announced that MDC Development Group of Atlanta will be the hotel developer for the project. MDC is also a major developer in the senior housing industry and 15 months ago opened Canterfield Oak Ridge Assisted Living. It has been very successful and well-received in our community.

I was advised yesterday (Monday, May 4) that the retail leasing component of the Main Street project is moving forward, as are the negotiations with a developer for the multi-family housing component of the Main Street project. Groundbreaking and demolition for Main Street is on schedule to begin by June 30. [Read more…]

UT: Expertise in materials science, additive manufacturing helps draw CVMR to Tenn.

Posted at
By Leave a Comment

Michael Hargett and Kamran Khoza of CVMR USA

CVMR President Michael Hargett, left, and Kamran Khozan, chairman and chief executive officer, joined local, state, and federal officials on Friday, March 13, to announce they’re moving company headquarters from Toronto to Oak Ridge, investing $313 million and adding 620 jobs.

 

Tennessee Governor Bill Haslam and Economic and Community Development Commissioner Randy Boyd announced last week that CVMR Corporation is relocating its global headquarters to Oak Ridge from Toronto, Canada. CVMR provides materials for additive manufacturing and announced it will create 620 jobs.

During recruitment of CVMR, University of Tennessee officials assisted the state and hosted the company at UT Knoxville to visit with engineering and chemistry faculty and learn about graduate programs, such as the Bredesen Center for Interdisciplinary Research and Graduate Education, as well as internships and co-ops for students, a press release said. UT System officials provided information about technology transfer, the UT Research Foundation, and Cherokee Farm Innovation Campus. CVMR also learned more about the University’s role in leading the Institute for Advanced Composites Manufacturing Innovation, or IACMI, a $259 million partnership announced by President Barack Obama in January. [Read more…]

Guest column: President Obama’s manufacturing announcement—what it means for UT, ORNL, East Tennessee

Posted at
By Leave a Comment

Jimmy Cheek and Martin Keller and Shelby Cobra

University of Tennessee Knoxville Chancellor Jimmy G. Cheek, right, stands with Martin Keller, associate laboratory director at Oak Ridge National Laboratory, in front of a Shelby Cobra printed as a collaboration between ORNL and UT personnel. The car served as a highlight of President Obama’s visit to the area on Friday. (Photo courtesy UT) 

 

KNOXVILLE—President Obama’s announcement on Friday that the University of Tennessee in Knoxville would be the lead institution in a $259 million advanced composites manufacturing project known as the Institute for Advanced Composites Manufacturing Innovation, or IACMI, was met with applause, but also a few questions.

Many wondered what advanced composites manufacturing really means, why the UT-led consortium was selected, and what the impact for the area might be.

Here are some answers.

What is IACMI?

IACMI is the newest federally funded institute for manufacturing innovation. Its focus is on advancing innovation in the manufacturing of composites used in automobiles, wind turbines, and compressed gas storage tanks. [Read more…]

3-D printed Shelby Cobra highlights ORNL R&D at Detroit Auto Show

Posted at
By 4 Comments

Shelby Cobra 3D Print at ORNL

This Shelby Cobra sports car, 3D-printed at the U.S. Department of Energy’s Manufacturing Demonstration Facility at Oak Ridge National Laboratory, will be on display this week at the Detroit Auto Show Technology Showcase. (Photo courtesy ORNL)

 

With a 3-D printed twist on an automotive icon, the U.S. Department of Energy’s Oak Ridge National Laboratory is showcasing additive manufacturing research at the 2015 North American International Auto Show in Detroit.

ORNL’s newest 3-D printed vehicle pays homage to the classic Shelby Cobra in celebration of the racing car’s 50th anniversary. The 3-D printed Shelby will be on display January 12-15 as part of the show’s inaugural Technology Showcase.

Researchers printed the Shelby car at DOE’s Manufacturing Demonstration Facility at ORNL using the Big Area Additive Manufacturing, or BAAM, machine, which can manufacture strong, lightweight composite parts in sizes greater than one cubic meter. The approximately 1,400-pound vehicle contains 500 pounds of printed parts made of 20 percent carbon fiber. [Read more…]

Energy Secretary Moniz showcases national labs on the Hill

Posted at
By Leave a Comment

Ernest Moniz

Ernest Moniz

Lab Day demonstrations highlight labs’ contribution to U.S. competitiveness and innovation

Submitted

WASHINGTON, D.C.—U.S. Secretary of Energy Ernest Moniz last week joined Senator Dick Durbin, an Illinois Democrat, and Senator Jim Risch, an Idaho Republican, for National Lab Day on the Hill. The event highlighted several notable research projects from across the national laboratory system.

Senators Durbin and Risch also formally launched the Senate National Laboratory Caucus, which aims to increase awareness of the reach of the national labs as leaders in developing new breakthrough technologies and discoveries to address some of our nation’s most pressing challenges.

“The national labs continue to advance science, clean energy, and nuclear security in this country, as they have for decades,” Moniz said. “The labs also provide essential capabilities for university and industrial researchers—nearly 30,000 per year—and advance technology frontiers, such as high performance computing and advanced manufacturing.” [Read more…]

UT engineering students help ORNL, Local Motors print drivable 3D car

Posted at
By 3 Comments

3D Car

John Rogers, co-founder and CEO of Local Motors, left, and Douglas Woods, president of the Association for Manufacturing Technology, drive away from the International Manufacturing Technology Show in Chicago over the weekend in a car printed with the help of UT students. (Photo courtesy UT)

 

KNOXVILLE—The only “car” that most people associate with printers is a “car-tridge” of ink, but that may soon change thanks in part to several students at the University of Tennessee in Knoxville.

UT, Oak Ridge National Laboratory, Local Motors, Cincinnati Incorporated, and Oak Ridge Associated Universities teamed up to print a working, drivable car over the weekend at the International Manufacturing Technology Show in Chicago.

The Strati 3D, officially produced by Local Motors, which has an office on Market Square in Knoxville, highlighted the show and placed what sounds like a product of science fiction firmly in the realm of reality.

“This brand-new process disrupts the manufacturing status quo,” said John B. Rogers Jr., chief executive officer of Local Motors. “It changes the consumer experience and proves that a car can be born in an entirely different way.” [Read more…]

Wounded veteran finds new way to serve by training for career in 3D printing

Posted at
By Leave a Comment

Joseph Grabianowski

Joseph Grabianowski

New training program prepares veterans, others to enter advanced manufacturing workforce

While 26-year-old wounded veteran Joseph Grabianowski has inspired Americans with his harrowing war story, someday he may be nationally known for building highly efficient exhaust systems for cars and trucks using 3D printing technology.

Grabianowski—pictured at left at the U.S. Department of Energy’s Manufacturing Demonstration Facility at Oak Ridge National Laboratory in front of a 3D printer holding a 3D-printed DOE seal and the plastic material from which it was made—is part of the Energy Department’s inaugural Energy Efficiency and Renewable Energy Advanced Manufacturing Internship. The pilot program is designed to provide accelerated, hands-on career training for veterans and next-generation engineers to prepare them to immediately enter the workforce of the growing advanced manufacturing industry.

Grabianowski stepped on an IED while deployed with his Army unit in Kandahar Province, Afghanistan, in May 2012. Damage from the blast required a rare, radical amputation of his lower body. He had long dreamed of being a U.S. Marshal but knew his path would now lead in a new direction. In a December 2013 interview with USA Today, Grabianowski said, “I still love my country…even though I can’t go be a marshal now, I can still go do something that would be a good service to my country.”

Barely two years later, his successful recovery is a testament to his personal will and determination. This self-proclaimed techie now envisions a career for himself in what he calls the “future of manufacturing,” which is additive manufacturing, also known as 3D printing. Through this pioneering program offered by the Energy Department’s Advanced Manufacturing Office, Oak Ridge Associated Universities, Pellissippi State Community College, and ORNL, Grabianowski is receiving the training needed to make his career goals a reality and prepare him to succeed in the additive manufacturing world.

“Where this industry is going to boom is right here in Oak Ridge,” Grabianowski said, “and the best engineers in the field are available through this program to teach me.” [Read more…]

ORNL, Ohio company work together on new large-scale 3-D printing system

Posted at
By Leave a Comment

ORNL and Cincinnati Inc. CRADA

From left are David Danielson, DOE assistant secretary for energy efficiency and renewable energy; Johnny Moore; DOE site office manager, Andy Jamison, Cincinnati Inc. CEO; and U.S. Rep. Chuck Fleischmann. (ORNL photo/Jason Richards)

Technology seeks to provide new capabilities for auto, aerospace, other U.S. industries

Oak Ridge National Laboratory is partnering with Cincinnati Inc., a manufacturer of high quality machine tools located in Harrison, Ohio, to develop a large-scale polymer additive manufacturing (3-D printing) system.

The partnership aims to accelerate the commercialization of a new additive manufacturing machine that can print large polymer parts faster and more cheaply than current technologies. The partnership agreement supports the U.S. Department of Energy’s Clean Energy Manufacturing Initiative to increase the efficiency of the U.S. manufacturing sector and ensure that innovative clean energy technologies continue to be developed in America.

ORNL is a DOE lab. [Read more…]

‘Bridging the Gap’ conference invites business community to ORNL

Posted at
By Leave a Comment

Bridging the Gap

Oak Ridge National Laboratory will host its annual “Bridging the Gap” conference March 5-6. (Image courtesy of ORNL)

Several of Oak Ridge National Laboratory’s most promising applied research and development capabilities will be in the spotlight March 5-6 as dozens of entrepreneurs, investors, and scientists gather at the lab’s third annual “Bridging the Gap” conference.

“This is a great opportunity for the region’s business community to receive capability briefings from some of the lab’s most dynamic researchers and to explore commercialization and collaboration opportunities,” said Tom Rogers, ORNL’s director of Industrial Partnerships and Economic Development.

[Read more…]