Oak Ridge Today

East Tennessee charitable organizations can apply for grants from Y-12 Community Investment Fund

Posted at
By Leave a Comment

CNS community investment fund enters second cycle; funds distributed through East Tennessee Foundation

Charitable organizations from across East Tennessee can apply for grants from the Y-12 Community Investment Fund that has been established by Consolidated Nuclear Security LLC. Also known as CNS, that contractor operates the Y-12 Nuclear Security Complex in Oak Ridge for the National Nuclear Security Administration.

CNS established the fund through the East Tennessee Foundation last year as part of its commitment to Oak Ridge and the surrounding communities, a press release said. In May, CNS awarded grants totaling more than $180,000 to 30 local nonprofits.

Nonprofit organizations in Y-12’s 20-county service area with projects or programs that address community needs and economic development opportunities are encouraged to apply for one-year grants, the press release said. Eligible organizations must be tax-exempt 501(c)(3) organizations or other exempt entities, such as public schools and governments/municipalities. [Read more…]

Secrecy, security, spies program at Turnpike Gatehouse on Saturday

Posted at
By Leave a Comment

The Oak Ridge Turnpike Gatehouse is pictured above on the west end of town. (Submitted photo)

The Oak Ridge Turnpike Gatehouse is pictured above on the west end of town. (Submitted photo)

 

A Manhattan Project National Historical Park program in west Oak Ridge on Saturday will give visitors some insight into what life was like in Oak Ridge during the Manhattan Project with all the security, the need for secrecy, and the worrying about spies.

The program is scheduled to start at 3:30 p.m. Saturday, September 10, at the Turnpike Gatehouse. It’s free and open to the public. Parking is limited, so please try to carpool if possible. The gatehouse is also at a trail head for the North Boundary Greenway, and visitors can go for a self-guided hike after the program.

The Manhattan Project National Historical Park was established in November 2015. It includes Oak Ridge, Tennessee; Hanford, Washington; and Los Alamos, New Mexico. The Manhattan Project was a top-secret federal program to build the world’s first atomic weapons during World War II, before Germany could. Oak Ridge was a production site for the project, and at the time, it was a secret city not shown on maps. [Read more…]

ORNL collaborates with six small businesses on clean energy tech

Posted at
By Leave a Comment

By Oak Ridge National Laboratory

Six small companies will tap the expertise of the U.S. Department of Energy’s Oak Ridge National Laboratory to move their manufacturing, fuel cell, geothermal, and vehicle technologies closer to the marketplace.

The businesses are among 43 selected to participate in the second round of DOE’s Small Business Vouchers, or SBV, pilot. With vouchers in hand, these businesses can better leverage the world-class capabilities of the department’s national laboratory system and bring their next-generation clean energy technologies to the marketplace faster.

“We need to accelerate the pace of clean energy innovation to build stronger economy and a brighter, cleaner future for our nation,” said David Friedman, acting assistant secretary for DOE’s Office of Energy Efficiency and Renewable Energy, or EERE. “The Small Business Vouchers pilot breaks down barriers for some of our greatest entrepreneurial minds, allowing them to work with our national laboratories across sectors and industries to accelerate a clean energy revolution that’s been under way since 2008.”

The Department opened the first round of SBV, a technology-to-market lab impact pilot project, in September 2015. In SBV’s first round, 33 small businesses received vouchers totaling $6.7 million. The 43 awards announced in August total more than $8 million. [Read more…]

ORNL receives DOE funding for applications for more powerful supercomputers

Posted at
By 1 Comment

Oak Ridge National Laboratory Sign

Photo by ORNL

 

Oak Ridge National Laboratory has received funding from a federal project to develop applications for more powerful supercomputers, systems that could be 50 to 100 times more powerful than today’s fastest supercomputers.

The project is the U.S. Department of Energy’s Exascale Computing Project, or ECP. It’s to develop applications for future exascale systems. Exascale refers to high-performance computing systems capable of at least a billion billion calculations per second, which is up to 100 times faster than the nation’s most powerful supercomputers in use today, a press release said.

The work on applications will help guide DOE’s development of a U.S. exascale ecosystem as part of President Barack Obama’s National Strategic Computing Initiative, or NSCI, the press release said.

The first round of ECP funding totals $39.8 million for 22 proposals representing teams from 45 research and academic organizations. ORNL researchers and technical staff will participate in 12 of the 22 projects.

The awards, announced Wedneday, target advanced modeling and simulation solutions to specific challenges supporting key DOE missions in science, clean energy, and national security, as well as collaborations such as the Precision Medicine Initiative with the National Institutes of Health’s National Cancer Institute, the press release said. [Read more…]

NNSA awards, then rescinds contract to manage, operate Nevada National Security Site

Posted at
By Leave a Comment

The National Nuclear Security Administration awarded but then rescinded a contract to manage and operate the Nevada National Security Site, where some waste from Oak Ridge is shipped.

The NNSA, a semi-autonomous agency within the U.S. Department of Energy, awarded the contract to manage and operate the Nevada National Security Site, or NNSS, to Nevada Site Science Support and Technologies Corporation, or NVS3T, on August 26, a statement said. The winning proposal identified NVS3T as a wholly owned subsidiary of Lockheed Martin.

In making the award, NNSA evaluated past performance and other factors based upon the proposal as submitted, the statement said. The award was valued at $5 billion over 10 years if all options were exercised.

But after the award was made, DOE and NNSA learned that Leidos Innovations Corporation had acquired NVS3T from Lockheed Martin. [Read more…]

Opinion: Alexander discusses ETTP demolition, development; Oak Ridge cleanup work

Posted at
By Leave a Comment

Lamar Alexander

Lamar Alexander

By Lamar Alexander

This week marked the end of an era. The last of the five uranium enrichment buildings in Oak Ridge has been cleaned up, making land available for new companies and new jobs coming to East Tennessee.

Tennessee should be extremely proud of the men and women who have worked for more than a decade to complete the demolition and cleanup at the East Tennessee Technology Park.

The story of how these buildings first came to be built is by now a familiar one. In 1942, President Franklin D. Roosevelt asked Senator Kenneth McKellar, the Tennessean who chaired the Appropriations Committee, to hide $2 billion for a secret project to win World War II. McKellar replied, “Mr. President, I have just one question: Where in Tennessee do you want me to hide it?”

They hid it in Oak Ridge, on 2,200 acres along the Clinch River, where they quietly built K-25, the largest building in the world, to enrich uranium through gaseous diffusion—a complicated and now mostly obsolete process. [Read more…]

Oak Ridge supports ORNL, LeMond Composites carbon fiber partnership

Posted at
By Leave a Comment

Jones LeMond Watson and Creswell Aug 31 2016

Pictured above at a meeting on Wednesday, Aug. 31, 2016, on a new carbon fiber partnership between Oak Ridge-based company LeMond Composites and Oak Ridge National Laboratory are, from left, Steve Jones (Oak Ridge economic development consultant), Greg LeMond (LeMond Composites), Mark Watson (Oak Ridge city manager), and Wade Creswell (president of The Roane Alliance). (Photo by City of Oak Ridge)

 

By City of Oak Ridge

The City of Oak Ridge is proud to support the recent announcement that LeMond Composites, a new company in Oak Ridge offering solutions for high-volume and low-cost carbon fiber, has secured a licensing agreement with Oak Ridge National Laboratory.

The news was made public on August 29 in a release from LeMond Composites. The company, founded earlier this year by three-time Tour de France champion Greg LeMond, focuses on making carbon fiber composites with global applications. The agreement with ORNL will make LeMond Composites the first company to offer these newly developed products to the transportation, renewable energy, and infrastructure markets.

LeMond Composites plans to build their first carbon fiber production line at their recently purchased facility on Palladium Way at Horizon Center in west Oak Ridge. Their first commercially available product is expected to be ready in early 2018.

“I am ecstatic about this unique technological application for carbon fiber in our community,” Oak Ridge Mayor Warren Gooch said. “We look forward to working with LeMond Composites to create jobs and further investment in Oak Ridge.” [Read more…]

Safety Fest TN in Oak Ridge, Knoxville to feature more than 80 free safety & health classes, sessions, demonstrations

Posted at
By Leave a Comment

 

Safety Fest TNThe Fifth Annual Safety Fest TN is scheduled for September 12-16 in Oak Ridge and Knoxville, and it will feature more than 80 free safety and health classes, sessions, and demonstrations. In addition to the free classes, a Safety Expo and Safety Demonstrations will take place on September 13 and 14, along with the “Secret City” Fire Officer Conference on September 14 and 15, a press release said.

The majority of the classes and sessions will be hosted by Consolidated Nuclear Security LLC, or CNS, at the New Hope Center at 602 Scarboro Road in Oak Ridge and Oak Ridge Associated Universities, or ORAU, at Pollard Technology Conference Center at 210 Badger Avenue in Oak Ridge. But classes are also being offered at seven other area locations including two in Knoxville, the press release said.

“It’s all about safety and health at work, at home and in the community,” said Michelle Keever, the Safety Fest TN class coordinator from URS | CH2M Oak Ridge LLC, or UCOR. “And what a community! In collaboration and with the irreplaceable help of United Steel Workers Local 9-288, we’re thrilled that 20 seniors at Sunbright School will receive OSHA 40-hour HAZWOPER training.” Sunbright is a one-campus pre-kindergarten through 12th-grade school located in rural Morgan County. [Read more…]

Photos: ORNL, Boeing set Guinness World Record with largest solid 3D printed item

Posted at
By Leave a Comment

ORNL-Boeing-Empric-and-Peter-Aug-29-2016-3-Web

Guinness World Records Judge Michael Empric, left, is pictured above with Bill Peter, director of ORNL’s Manufacturing Demonstration Facility in Hardin Valley, after Empric had confirmed that a trim-and-drill tool made at the MDF for Boeing (it’s partially pictured in the foreground) had set the world record for largest solid printed 3D item on Monday, Aug. 29, 2016. (Photo by John Huotari/Oak Ridge Today)

 

A tool made by Oak Ridge National Laboratory has set a world record for largest solid item manufactured on a 3D printer. Guinness World Records confirmed the tool’s measurements during a visit to ORNL’s Manufacturing Demonstration Facility in Hardin Valley on Monday.

Here are pictures from the Monday morning award ceremony by John Huotari of Oak Ridge Today and ORNL/U.S. Department of Energy.

The trim-and-drill tool measures 17.5 feet long, 5.5 feet wide, and 1.5 feet tall. It’s comparable in length to a large sport utility vehicle and weighs approximately 1,650 pounds.

It will be used to help make a wing part on the Boeing 777X airplane, a passenger jet. After ORNL completes some testing, Boeing will evaluate the tool in the company’s new production facility in St. Louis and then provide information to ORNL about its performance. [Read more…]

Khaleel to lead ORNL’s Energy and Environmental Sciences Directorate

Posted at
By Leave a Comment

Mohammad A. Khaleel

Mohammad A. Khaleel

 

Mohammad A. “Moe” Khaleel has been named associate laboratory director for energy and environmental sciences at the U.S. Department of Energy’s Oak Ridge National Laboratory.

The work that Khaleel will oversee for the Energy and Environmental Sciences Directorate, or EESD, includes biological and environmental research for DOE’s Office of Science and an extensive set of research and development programs supported by DOE’s Office of Energy Efficiency and Renewable Energy, Office of Electricity Delivery, and Energy Reliability and Office of Fossil Energy.

EESD also engages with a broad external community that includes a growing list of industrial partners through the ORNL-managed BioEnergy Science Center, the Manufacturing Demonstration Facility, and the National Transportation Research Center, a press release said.

“Moe brings a rich background as both a researcher and scientific leader,” ORNL Director Thom Mason said. “In his new position, he will oversee activities that translate basic science into applied research and development (R&D), with direct benefits for energy production, transmission, and conservation. ORNL will benefit from his experience and his vision.” [Read more…]

ORAU, University of Oklahoma win $8.4 million NOAA award for weather, climate change research

Posted at
By Leave a Comment

ORAU Satellite Photo

Photo via ORAU on Twitter

 

The University of Oklahoma and Oak Ridge Associated Universities were recently awarded $8.4 million over three years from the National Oceanic and Atmospheric Administration to conduct weather and climate change monitoring research. The funding provides OU with the opportunity to expand its Cooperative Institute for Mesoscale Meteorological Studies’ research capabilities through a partnership with NOAA’s ORAU-managed Atmospheric Turbulence and Diffusion Division, or ATDD, program, a press release said.

“CIMMS is one of OU’s treasures as it has played a significant role in advancing our understanding of the atmosphere as well as provided valuable technologies and tools for operational forecasters,” said Kelvin Droegemeier, OU vice president for research. “This new award will build upon these historical strengths to address some of today’s most compelling challenges in weather and climate.”

The award will help further OU’s key research in areas such as boundary layer characterization, which is the atmospheric layer closest to Earth’s surface, and climate observations and analyses. This research will directly support NOAA’s goal to improve prediction of severe weather near the earth’s surface and will provide funding for a research position at the ATDD location in Oak Ridge. [Read more…]

ORNL, Boeing set Guinness World Record with 3D printed tool for Boeing 777X wing part

Posted at
By Leave a Comment

GUINNESS WORLD RECORDS measurement of ORNL-Boeing trim tool Aug 29 2016

Official measurement of the 3D printed trim tool co-developed by Oak Ridge National Laboratory and The Boeing Company exceeded the required minimum size to achieve the Guinness World Records title of largest solid 3D printed item. Pictured above on Monday, Aug. 29, 2016, is Guinness World Records Judge Michael Empric. (Photo courtesy ORNL, U.S. Department of Energy)

 

HARDIN VALLEY—A tool made by Oak Ridge National Laboratory has set a world record for largest solid item manufactured on a 3D printer. Guinness World Records confirmed the tool’s measurements during a visit to ORNL’s Manufacturing Demonstration Facility in Hardin Valley on Monday.

The trim-and-drill tool measures 17.5 feet long, 5.5 feet wide, and 1.5 feet tall. It’s comparable in length to a large sport utility vehicle and weighs approximately 1,650 pounds.

It will be used to help make a wing part on the Boeing 777X airplane, a passenger jet. After ORNL completes some testing, Boeing will evaluate the tool in the company’s new production facility in St. Louis and then provide information to ORNL about its performance.

ORNL printed the trim-and-drill tool in only 30 hours on a 3D printer at the Manufacturing Demonstration Facility in Hardin Valley using mostly ABS (acrylonitrile butadiene styrene) mixed with about 20 percent carbon fiber. ABS is the same material used to produce Legos, and it’s a tough, strong polymer, said Bill Peter, MDF director.

Judge Michael Empric said Guinness World Records had set a minimum measurement of 10.5 cubic feet for the new largest solid 3D printed item, which is a new category. The Boeing tool printed by ORNL measured much larger, 82.4 cubic feet, Empric said.

The original tool was printed in one piece and was larger, but it was trimmed down, Empric said. [Read more…]