Oak Ridge Today

Small businesses invited to participate in DOE national lab vouchers pilot

Posted at
By Leave a Comment

ORNL Industry Day Officials Sept. 24, 2015

David Danielson, left, DOE assistant secretary for energy efficiency and renewable energy, is pictured above with officials at Industry Day at ORNL on Wednesday, Sept. 23, 2015, when a 3D-printed vehicle and building were unveiled. Other officials include ORNL Director Thom Mason; U.S. Rep. Chuck Fleischmann; Johnny Moore, ORNL Site Office manager; and David Milhorn, UT executive vice president. (Photo by John Huotari/Oak Ridge Today)

 

Small businesses in the clean energy sector are invited to apply for assistance from the U.S. Department of Energy’s national laboratories through the department’s new Small Business Vouchers Pilot.

David Danielson, DOE Assistant Secretary for the Office of Energy Efficiency and Renewable Energy, or EERE, announced the launch of the pilot website during EERE’s Industry Day event on Wednesday, September 23, at Oak Ridge National Laboratory.

“Small businesses that are developing the new clean energy technologies that are needed to cut carbon pollution and create good-paying American jobs often lack the resources necessary to move their innovative ideas from the laboratory bench to the marketplace,” Danielson said. “The EERE Small Business Vouchers pilot is designed specifically to help small businesses bring next-generation clean energy technologies to the market faster by leveraging the world-class capabilities of our national laboratories to solve small businesses’ most pressing challenges.” [Read more…]

ORNL: Car, building are 3D-printed, can power each other

Posted at
By Leave a Comment

ORNL 3D-Printed House and Vehicle on Sept. 24, 2015

A 3D-printed vehicle and building that were part of a nine-month research demonstration project were unveiled on Industry Day at ORNL on Wednesday, Sept. 23, 2015. The natural gas-powered car and solar-powered building can provide electricity to each other. (Photo by John Huotari/Oak Ridge Today)

 

A car and house built using large-scale 3D printers at Oak Ridge National Laboratory can provide power to each other, and they’re part of a project designed to answer “what if” questions that could lead to innovations in building and car construction and energy use, storage, and consumption, researchers and officials said Wednesday.

The 210-square-foot house—it’s a solar-powered building—and the printed utility vehicle—officials affectionately call it a PUV—were printed at ORNL’s Manufacturing Demonstration Facility on Hardin Valley Road.

They were unveiled at ORNL on Wednesday during the lab’s first-ever Industry Day. The building and PUV are part of a project called the Additive Manufacturing Integrated Energy, or AMIE, demonstration.

Additive manufacturing is the process used to build something one layer at a time. One of the most well-known examples is the Shelby Cobra car 3-D printed on a large-scale polymer printer at the MDF. President Barack Obama and Vice President Joe Biden admired that vehicle—and joked about taking it for a spin—during a trip to East Tennessee in January. [Read more…]

Commerce secretary to tour UT partner IACMI, ORNL manufacturing facility

Posted at
By Leave a Comment

Penny Pritzker

Penny Pritzker

KNOXVILLE—On Thursday, August 27, Secretary of Commerce Penny Pritzker and Department of Energy Assistant Secretary David Danielson will visit the Institute for Advanced Composites Manufacturing Innovation in Knoxville.

The visit is part of a two-day tour of the institutes make up the National Network for Manufacturing Innovation. Governor Bill Haslam, U.S. Representative Chuck Fleischmann, Knoxville Mayor Madeline Rogero, and Knox County Mayor Tim Burchett will join Pritzker for portions of the day’s activities.

The group will tour the U.S. Department of Energy’s Manufacturing Demonstration Facility and National Transportation Research Center at Oak Ridge National Laboratory. The University of Tennessee in Knoxville is a key strategic partner of IACMI and led the proposal efforts with ORNL.

President Barack Obama and Vice President Joe Biden announced the new institute in January during a visit to East Tennessee. The White House initiative aims to strengthen the global competitiveness of America’s manufacturing sector and the workforce. The NNMI now has six institutes, and three more are being formed. [Read more…]

ORNL, Ohio company work together on new large-scale 3-D printing system

Posted at
By Leave a Comment

ORNL and Cincinnati Inc. CRADA

From left are David Danielson, DOE assistant secretary for energy efficiency and renewable energy; Johnny Moore; DOE site office manager, Andy Jamison, Cincinnati Inc. CEO; and U.S. Rep. Chuck Fleischmann. (ORNL photo/Jason Richards)

Technology seeks to provide new capabilities for auto, aerospace, other U.S. industries

Oak Ridge National Laboratory is partnering with Cincinnati Inc., a manufacturer of high quality machine tools located in Harrison, Ohio, to develop a large-scale polymer additive manufacturing (3-D printing) system.

The partnership aims to accelerate the commercialization of a new additive manufacturing machine that can print large polymer parts faster and more cheaply than current technologies. The partnership agreement supports the U.S. Department of Energy’s Clean Energy Manufacturing Initiative to increase the efficiency of the U.S. manufacturing sector and ensure that innovative clean energy technologies continue to be developed in America.

ORNL is a DOE lab. [Read more…]

Oak Ridge carbon fiber plant could lower cost of strong, lightweight material

Posted at
By Leave a Comment

Carbon Fiber Technology Facility

Gary R. Lownsdale of Plasan Carbon Composites, right, talks to Tennessee Gov. Bill Haslam, center, near a Chevrolet Corvette ZR1 hood at the Carbon Fiber Technology Facility on Tuesday as federal, University of Tennessee, and Oak Ridge National Laboratory officials listen.

A unique manufacturing plant in west Oak Ridge that started operating about six weeks ago can make 25 tons of carbon fiber each year. It’s material that could be used for prototype parts in products ranging from cars and airplanes to wind turbine blades and natural gas tanks.

The $35 million Carbon Fiber Technology Facility at Horizon Center Business Park is designed to “scale up” laboratory research on low-cost carbon fiber, make enough material to help industrial partners build prototype carbon-fiber composite parts, and develop a skilled manufacturing workforce.

Carbon fiber is strong and lightweight, but it is also expensive and that has limited its use.

Officials hope to use the 42,000-square-foot Carbon Fiber Technology Facility to change that. They want to make producing carbon fiber as cost-efficient as manufacturing steel or aluminum. [Read more…]

DOE, ORNL to celebrate carbon fiber facility, announce manufacturing initiative

Posted at
By Leave a Comment

Officials from the U.S. Department of Energy and Oak Ridge National Laboratory will celebrate a unique carbon fiber facility on Tuesday morning.

DOE will also announce a new U.S. manufacturing initiative during the ceremony at the Oak Ridge National Laboratory’s Carbon Fiber Technology Facility at Horizon Center Business Park in west Oak Ridge. [Read more…]