Jeff Nichols, associate director for computing and computational sciences at Oak Ridge National Laboratory, in front of Titan, which was the world’s fastest supercomputer in November 2012 but is now ranked No. 2. (Photo courtesy ORNL)
A Chinese supercomputer kept its No. 1 spot, and Titan at Oak Ridge National Laboratory stayed at No. 2 in the latest semiannual ranking of the world’s most powerful supercomputers.
The Chinese supercomputer, Tianhe-2, was developed by China’s National University of Defense Technology, and it’s been in the top spot three times in a row on the Top500 List. Tianhe-2 bumped Titan from the top spot in June 2013.
The Chinese supercomputer performed at 33.86 petaflops—that’s 33.86 quadrillion calculations per second—on a test known as the Linpack benchmark, the press release said. Titan performed at 17.59 petaflops.
There was little change among the ranking of the world’s Top 10 supercomputers in the latest edition of the closely watched list, a press release said. The only new entry was at number 10—a 3.14-petaflop Cray XC30 installed at an undisclosed U.S. government site.
The Top500 list was announced Monday morning. The list is compiled by Erich Strohmaier and Horst Simon of Lawrence Berkeley National Laboratory, Jack Dongarra of the University of Tennessee in Knoxville, and Martin Meuer of Prometeus, Germany.
The press release said the U.S. share of top supercomputers has dipped 15 percent, while China has increased its share by 20 percent. Although the United States remains the top country in terms of overall systems with 233, this is down from 265 on the November 2013 list, the press release said. The number of Chinese systems on the list rose from 63 to 76, giving the Asian nation nearly as many supercomputers as the combination of the United Kingdom, with 30; France, with 27; and Germany, with 23. Japan also increased its showing, up to 30 from 28 on the previous list.
Monday’s edition of the twice-yearly TOP500 list was the 43rd edition. A detailed analysis of the latest list was presented at the International Supercomputing Conference in Leipzig, Germany. The full list has also been published at Top500.org.
Here is more information from the press release:
Slowing trend in performance growth
Since its inception in June 1993, the TOP500 list has served as a consistent measure of the performance growth of supercomputers, since all systems are ranked according to performance running the same Linpack benchmark application. For the second consecutive list, the overall growth rate of all the systems is at a historical low.
This lag in the overall average performance of all 500 systems is noticeably influenced by the very large systems at the top of the list. Recent installations of very large systems—up to June 2013—have counteracted the reduced growth rate at the bottom of the list, but with few new systems at the top of the past few lists, the overall growth rate is now slowing. This offers an indication that the market for the very largest systems might currently behave differently from the market of mid-sized and smaller supercomputers.
This is supported by the fact that the performance of the last system on the list (No. 500) has consistently lagged behind historical growth trends for the past five years, a trajectory that now increases by only 55 percent each year. Between 1994 and 2008, however, the annual growth rate for the No. 500 systems’ performance was 90 percent.
On the latest edition of the list, the No. 500 system recorded a performance of 133.7 teraflops (trillions of calculations per second), 117.8 teraflops six months ago. The last system on the newest list was listed at position 384 in the previous TOP500. This represents the lowest turnover rate in the list in two decades.
Other highlights from the 43rd listÂ
Total combined performance of all 500 systems has grown to 274 petaflops, compared to 250 petaflops six months ago and 223 petaflops one year ago. This increase in installed performance also exhibits a noticeable slowdown in growth compared to the previous long-term trend.
There are 37 systems with performance greater than a petaflop on the list, up from 31 six months ago.
The No. 1 system, Tianhe-2, and the No. 7 system, Stampede, use Intel Xeon Phi processors to speed up their computational rate. The No. 2 system, Titan, and the No. 6 system, Piz Daint, use NVIDIA GPUs to accelerate computation.
A total of 62 systems on the list are using accelerator/co-processor technology, up from 53 from November 2013. Forty-four of these use NVIDIA chips, two use ATI Radeon, and there are now 17 systems with Intel MIC technology (Xeon Phi). The average number of accelerator cores for these 62 systems is 78,127 cores/system.
Intel continues to provide the processors for the largest share (85.4 percent) of Top500 systems. The share of IBM Power processors remains at 8 percent, while the AMD Opteron family is used in 6 percent of the systems, down from 9 percent on the previous list.
Ninety-six percent of the systems use processors with six or more cores and 83 percent use eight or more cores.
HP has the lead in systems and now has 182 systems (36 percent), compared to IBM with 176 systems (35 percent). HP had 196 systems (39 percent) six months ago, and IBM had 164 systems (33 percent) six months ago. In the system category, Cray remains third with 10 percent (51 systems).
Leave a Reply